If the machine status for the Curio model displays a syncing error, this is usually due to a failure with proper loading of the Curio base.

Checking the Curio Base


To resolve this concern:


  1. Close Silhouette Studio
  2. Power off the Curio machine
  3. Insert the base into the front of the Curio
  4. Push the base inward until the leading edge of the base extends out the back of the Curio
  5. Power on the Curio
  6. Re-open Silhouette Studio

If the base has been properly loaded, both indicator lights on the right side of the machine should be steadily illuminated. 

If one of the indicator lights continues to blink, reattempt the steps above to properly align and load the base.