This feature is included in All Editions of Silhouette Studio
You can use your own images created in other programs with Silhouette Studio using the Trace feature.
The Trace panel can be found in the right-hand side toolbar, or by going to the Panels menu and selecting Trace.
Tracable File Types
The Silhouette Studio software program is able to use external images that are in a basic raster image format, including
Not all images are designed in such a way that they can be traced well for cutting purposes. Silhouette cannot support or guarantee results for files not offered by our company.
How to Trace
To open an image and trace it in Silhouette Studio
- Open Silhouette Studio
- Go to the File > Open option to locate and open the image file
NOTE: If on a PC, "All Files" may need to be selected from the "file type" selection in the "Open" window in order to locate your files
- Click on the Trace icon
- Click on the Select Trace Area option
- Draw a box around the image that is desired to be traced
NOTE: The trace filter will show a yellow area covering the image. This yellow area is a preview for where your cut lines would be created.
- Adjust the tracing filters to your liking.
Filters include the following:
- High Pass Filter
Trace lines are created beginning from the outside of your image and then working toward the inside of the image as the filter setting is adjusted up. This is a good option if you are trying to create a basic cutting frame from a more detailed image.
Determines how broadly you apply the trace filter to your image beginning with the darkest colors for low settings and applies lighter color parts as well as you move to higher settings.
This setting controls the smoothness of edges around the image. It is only necessary to use if the image in question is of a low quality and highly pixilated.
- High Pass Filter
- Once the trace area has been drawn and desired filter settings are in place, select the desired tracing method under Apply Trace Method.
The available trace options are as follows:
This option will trace all outer and inner lines. This is generally preferable if you are attempting to create a regular cut image with multiple parts and specific details to be cut.
- Trace Outer Edge
This option will create a cut line only around the outer edges of your image. This is generally preferable if you are attempting to create a Print & Cut image.
- Trace and Detach
This option will detach a portion of the print image from its original background. This can be helpful if you need to remove the white background of an imported print image, or just want to work with one smaller part of the imported image.
Performing these steps will create cut lines for the imported image.