Replacement cords (power or USB) can be purchased from SilhouetteAmerica.com.
If you wish to purchase a cord elsewhere, please note the cord specifications below.
NOTE: Silhouette cannot guarantee other cords will work properly with your machine. The use of Silhouette cords is always recommended.
Cutting Machines (All Models)
Power Adapter & Cord
Input: 100-240V~ 50/60Hz, 1.2A
Output: +24V - 1.25A (up to 2.0A)
Figure 8 cord end (Type A)
USB Cord
Male-to-male USB 2.0 cable with one A-type connection and one B-type connection
NOTE: Cutting machines with the adapter above are dual voltage. They can be used in countries with 100 or 240 Volt systems.
Mint Stamp Machine
Power Adapter & Cord
Input: 100-240V~ 50/60Hz, 0.6A
Output: 12V - 2.0A
USB Cord
Male-to-male USB 2.0 cable with one A-type connection and one Micro B-type connection
Alta 3D Printer
Power Adapter & Cord
Input: 100-240V~ 50/60Hz, 1.5A
Output: 12.0V - 5.0A
Figure 8 cord end (Type A)
USB Cord
Male-to-male USB 2.0 cable with one A-type connection and one B-type connection
About International Power Cords
Silhouette cutting machines are dual voltage compatible. They can work in any country on a 100 to 240 Volt system.
- If purchased in the same country
The correct power cord for your country and currency converter is included with your machine. No additional adapters or converters are necessary. - If purchased from a US/Canadian location
The machine will not include the correct power cord for international power sockets. However, the currency converter will be included and no power converters are necessary. You would simply need to have a plug adapter so that the US plug prongs will fit correctly into your country's power socket type.