If your cutting machine is not powering on when you press the power button, check all points listed below to find the source of the concern. 1. Check ...
Tue, 7 Jan, 2025 at 3:17 PM
Assessing Unsuccessful Cutting Results There are two categories of cutting issues for unsuccessful cutting results (the job was sent to the machine, but t...
Wed, 8 Jan, 2025 at 2:17 PM
The Silhouette machine is not generally a quiet machine during operation. Unless you are experiencing universal cutting issues where cuts appear to be off, ...
Tue, 7 Jan, 2025 at 3:19 PM
Checking the Loading Method (Older Models Only) All current cutting machine models determine how the machine is loaded from the software. If you are enc...
Wed, 8 Jan, 2025 at 2:17 PM
Proper Loading Review Since this issue most always indicates that the cutting mat was not loaded properly, we recommend to first review information on p...
Wed, 8 Jan, 2025 at 2:17 PM
Pause Not Stopping Job Immediately Using the Pause Button The Pause button will only stop the job after it has completed the current continuous line it i...
Wed, 8 Jan, 2025 at 2:17 PM
