To locate what firmware version your Silhouette machine currently has installed: Power on your machine Ensure your machine is connected via USB to y...
Tue, 16 May, 2023 at 1:49 PM
The Cameo model provides a one-touch firmware update experience. Checking Firmware Version To verify your firmware is up to date, please perform the f...
Tue, 16 May, 2023 at 1:52 PM
The Portrait model provides a one-touch firmware update experience. Checking Firmware Version To verify your firmware is up to date, please perform th...
Sat, 10 Sep, 2022 at 12:41 PM
You can update your older model cutting machine firmware as follows. NOTE: Please allow approximately 20 minutes for the update Firmware Update for PC...
Sat, 10 Sep, 2022 at 1:02 PM
Whenever a new machine is connected to Silhouette Studio, the software will run a check for any available firmware updates. There is unfortunately no way to...
Thu, 14 Sep, 2023 at 3:51 PM
If you have attempted to update your Portrait 3 firmware and have encountered an error where you need to push the firmware update through again to resolve t...
Tue, 15 Oct, 2024 at 3:15 PM
If your Cameo 3 firmware is bricked, please perform the following steps. Re-Run Firmware Update Unplug the power cord from the machine Hold the powe...
Wed, 30 Oct, 2024 at 11:15 AM
If you have attempted to update your Cameo 4 firmware and have encountered an error where you need to push the firmware update through again to resolve the ...
Tue, 17 Oct, 2023 at 3:02 PM
If your Cameo 2 firmware is bricked, please perform the following steps. Troubleshooting Download the attached zip files Unzip these files to your ...
Wed, 30 Oct, 2024 at 11:11 AM
